User manual

System Setup
18
Section 3
ZonePRO
™
ZonePRO
™
User Manual
The Schedule Wizard provides for pre-determined scene changes corresponding to the time of
day and/or day of week. For example installations such as restaurants often require volume
increases during peak hours of operation. This sub-section will walk you through setting up
the Schedule Wizard.
From the Unit view of the setup, Select the Wizard pull down from the menu bar and
then select the option labeled Schedule Wizard. Once selected, a window will appear as
follows:
At this point you can create a schedule for each day of the week, by recalling scenes at any
time with up to 1 minute resolution. Up to 24 scenes can be recalled per day. Once all
changes have been made, select Ok or Cancel and the window will be closed.
After editing and storing the scene or scenes you can store this file to your computer by
selecting File Save from the Device View menu.
Many functions of the ZonePRO 1260 can be accessed and performed from the front panel of
the unit. The following information will cover several areas of operation of the 1260.
Changes to the output zones can be made by pressing the buttons associated with them. Once
and output button is pressed the available parameters are located on the front panel display.
To edit any of them simply press button 1, 2, or 3 and edit that parameter. The page routing
can also be edited in a similar fashion; press the button associated with that page microphone
and select the desired routing.
3.9 - Hardware Navigation
3.8 - File Save
3.7 - Schedule Wizard