User manual

Getting Started
ZonePRO
™
User Manual
4
Section 1
ZonePRO
™
The ZonePro Designer Graphic User Interface (GUI) provides all the control functions neces-
sary to configure and program the ZonePro products. The GUI provides network tools for
configuring your control network as well as multiple “Wizard” functions for configuring the
system routing, implementing end-user control surfaces, programming parameters, and even
creating automatic system changes. Understanding the ZonePro Designer software is the key
to getting full functionality from ZonePro products.
Minimum System Requirements for ZonePRO Designer are:
1 GHz or faster processor
Windows 2000 or XP
256 MB RAM or (512 MB Recommended)
Recommended screen resolution: 1024 x 768 pixels or higher
Installation
• Install the ZonePRO GUI software from either the dbx website at www.dbxpro.com or from
the included CD ROM onto your computer.
• Once the software setup is downloaded, double click on the file named: ZonePRO setup.
• The application will proceed to prompt you for the installation location.
• Once the software installation has been completed, it is recommended that you restart your
computer.
Note
You must disable virus protection software during the installation of
ZonePRO Designer.
1.5 - Software Installation
1. 4 - ZonePRO Designer GUI