Specifications

92
CENTERLINE 2100 Options for Drives Units
Option Description PowerFlex 40, 70
and 700 Drives
PowerFlex
753 Drives
PowerFlex 70 and
700 Manual Drive
Bypass
2162Q
2162R
2162T
2163Q
2163R
2163T
2162U
2163U
2164Q
2164R
2165Q
2165R
Separate
Control
Fuse
Fuse (10 A) for customer supplied separate control source, 120V AC only.

Grounded
Unit Door
Hinge mounted ground strap mounted on hinge of unit door. Unit door
grounding strap for IEC requirements.
    
Unit Load
Connector
Specify on plug-in units for sections with
unplated vertical unit load ground bus
Unplated copper
    
Specify on plug-in units for sections with tin
plated vertical unit load ground bus
Tin plated cooper
    
Unit
Ground
Stab
Specify on plug-in units for sections with vertical
plug-in ground bus. Unplated copper unit
ground stab can also be used with steel vertical
ground bus.
Copper alloy
    
Unplated copper
    
Tin plated cooper
    
Auxiliary
Contacts
One Normally Open mounted on operating mechanism (operates with
movement of external handle only)
    
One Normally Open mounted internally. Circuit breaker units only.
    
One Normally Closed mounted on operating mechanism (operates with
movement of external handle only)
    
One Normally Closed mounted internally. Circuit breaker units only.
    
T-Handle T-Handle latch on unit door.
    
Control
Circuit
Wiring
Type MTW (TEW) 90 °C #16 AWG copper wire, VW1 rated, provided as standard
    
Control
Wire
Markers
Brady Datab wire markers at each end of the control wires.
    
Heat shrink type wire markers
    
Sleeve type wire marker
    
French
Legend
Plates
Legend plates printed in French are available on all pilot devices.
    
Spanish
Legend
Plates
Legend plates printed in Spanish are available on all pilot devices.
    
Unit Door
Nameplates
Door Nameplate Screws Plated steel nameplate
screws. Provided when
cardholder or nameplates
are not selected.
    
Card Holder for Unit Doors 1.125'' x 3.625'' plastic card
holders with blank cards
    
1.125” x 3.625” engraved 3-line nameplate or
4-line nameplate
Acrylic plate. Nameplate is
white with black letters or
black with white letters.
    
Phenolic plate. Nameplate is
white with black letters or
black with white letters.
    
Stainless
Steel
Nameplate
Screws
Stainless steel nameplate screws for unit nameplates (2 per unit)
    
Export
Packing
Below Deck
Container is skid mounted and packaged in clear plastic. Packing is not
watertight or waterproof. Extended storage may require space heater and other
considerations.
    