Specifications

61
Maximum Number of Additional Auxiliary Contacts Per Starter/Contactor
Bulletin Number NEMA Size
1…2
NEMA Size
3…5
NEMA Size
6
2102L, 2103L 6 6
2112/2113 4
2103L/2113 Dual
2106/2107 4 4
2122/2123
2102L/2103L/2112/2113 0.5SF 3
Miscellaneous Options
Option Description FVC FVR FVNR TS1W
TS2W
2102L
2103L
2106
2107
2112
2113
2122
2123
Omission of
Power Terminal
Blocks
For contactors and starters (NEMA Type BD)
NEMA sizes 1, 2 and 3
For 30 A and 60 A fusible disconnect feeders Available for Bulletin 2192F ONLY
Control
Terminal Block
One extra 5-pole control terminal block (unwired)
T-Handle T-handle latch on unit door Available on all units except 2191F, 2191M,
2192M, 2193M, 2195, 2193LE and 2193PP
Key-interlock
Mounting
Provision
For circuit breaker or fusible disconnect main or feeder units. Permits customer
mounting of Superior or Kirk brand key interlocks on unit operating handle.
Available for Bulletins 2192 and 2193
ONLY
Current
Transducers
(4…20 mA
Output)
Ohio Semitronics Model MCT5-005E 85…135V AC, 50/60Hz power (includes current
transformer)
Crompton Instruments Model 253-TALU-LSHG 120V AC +/-20%,
50/60Hz power (includes current transformer).
Current Sensors
(4…20 mA
Output)
N-K Technologies model AT 12…40V DC at sensor (current transformer not needed on
sizes 1…3, included on sizes 4…6)
Riley Corp., 5…40V DC at sensor (current transformer not needed model 420, sizes
1…3, all voltages)
Riley Corp., 5…40V DC at sensor (current transformer not needed model 420L, size 4
(all voltages) and size 5 at 380V, 415V, 480V and 600V only)
Riley Corp., 5…40V DC at sensor (current transformer not needed model 420X, size 5
at 208V and 240V and size 6 (all voltages))
Control Circuit Options
Option Description FVC FVR FVNR TS1W
TS2W
2102L
2103L
2106
2107
2112
2113
2122
2123
Control Circuit
Wiring
Type MTW(TEW) 90 °C copper wire, VW1 rated #16 AWG
Type MTW(TEW) 90 °C copper wire, VW1 rated #14 AWG
(tinned)
Type SIS 90 °C copper wire #14 AWG
(tinned)
Control Circuit
Lugs
Insulated ring lugs for control wires where possible
Insulated spade lugs for control wires where possible