Specifications

100
Motor Applications
The Motor Control Center Business has made engineering evaluations for the protective device (circuit breaker or fuse)
selection, sizing and setting range based on the protection rules/requirements and motor criteria as stipulated in NEC,
NEMA and UL standards (for example, motor full load currents [FLCs], X/R ratios, lock rotor currents, and nominal utilization
voltages). Should the motor application have criteria that deviate from those stated in the aforementioned standards,
higher FLC and/or motor inrush currents (greater than 1300% of the nominal FLC) may be experienced (for example,
special motors, non-standard NEMA motors, energy efficient motors, Design E motors, and IEC Type N motors).
Additional Resources
For assembled motor control centers, the customer is supplied with a copy of the motor control center layout and
specification (Form 385) and the CENTERLINE 2100 Motor Control Centers User Manual, publication 2100-IN012
. The
Receiving, Handling and Storing Motor Control Centers Instructions, publication 2100-IN040
, is attached to the outside
packaging of each shipping block.
Up to three electronic documentation CDs can be also be provided at no additional cost for each MCC. The CD contains
the following:
• Equipment list (elevation, layout specification) drawings
• One-line diagrams (if requested)
• Unit wiring diagrams
• Spare parts list
• User and installation manuals for Rockwell Automation products, supplied in the specific motor control center
• Test reporting
For other documentation, contact your local Rockwell Automation Sales Office.
Additional CENTERLINE 2100 Motor Control Centers Publications
Publication Title
2100-SR012
CENTERLINE 2100 MCC Specification Guide
2100-SR003
CENTERLINE 2100 MCC Specification Checklist
2100-4.2
Mains and Incoming Lines Dimension
2100-IN012
CENTERLINE 2100 User Manual
2100-6.0.2
Renewal Parts Publication
2100-AT003
Power System Configuration Considerations for Selection of
CENTERLINE 2100 MCCs
2100-SR008
DeviceNet Specification Guide
2100-TD019
DeviceNet Hardware Manual
2100-AT002
Arc-Flash Protection Marking Guide for CENTERLINE Motor Control
Center
2100-AP003
Arc-Flash Resistant Low Voltage Motor Control Center Designs
2100-TD001
CENTERLINE 2100 MCCs Instantaneous Trip Motor Circuit Protectors
(HMCP)
2100-TD002
Inverse Time Motor Circuit Protectors for CENTERLINE 2100 MCCs
2100-TD003
CENTERLINE MCC Power Fuses