User's Manual
AN2400A MANUAL
Product description:
AN2400A for car alarm system, remote control system, only compatible with iDataStart vehicle
control system. AN2400A turns on receiveing function after power on and stays for transmitter
commands. Once transmitter received AN2400A deliver command to iDataStart vehicle control
system to activate corrsponding function and return confirmation signal back to transmitter.
1. Antenna Model : AN2400A
2. Technology: Lora 2-WAY
3. Max Range : 2 miles
4. LED : status indication
5. Button: setup key
6 Connect to iDataStart (To plug Weblink or RF-Decoder/Antenna)
pin1- Rx (Data from antenna, 0-5 Volts)
pin2- Tx (Data from iDataStart, 0-5 Volts)
pin3- GND (Ground from iDataStart)
pin4- 12V (Power from iDataStart, 12V )
Installation guide:
AN2400 come with 3M tape, stick AN2400A on the edge of windshield inside of vehicle, like
picture shown below: