Instruction manual

Coal-trol Digital™ - Model TS2 V3
Automation Correct LLC
5/2010 R0
www.automationcorrect.com
Page 9
Instruction Manual
72F
Temperature Setting
D 73F
Current Time
1126A
Round Robin Temperature/Time Display
Current Temperature
The Round-robin display occurs
automatically if the Thermostat is left
alone for 30 seconds. (No button
presses)
FSM 12
Fan Speed Control
If FR [Firing Rate] is greater than
60% then the Fan Speed will
automatically revert to Fan Speed
Auto in 1 hour.
Press MENU key once.
Display shows FSA [
Fan
Speed Auto].
Setting FSM=0 returns the
thermostat to automatic fan
speed control (FSA).
DISPLAY ACTION NOTE
DISPLAY
NOTE
"D" for Daytime Temperature setting.
"N' for Nighttime Temperature setting.
"H" for Hold Temperature setting.
"F" for Fahrenheit
"C" for Celsius
"A" for AM
"P" for PM
While in regular operation, the thermostat cycles between the Current
Temperature, the Temperature Setting, and the Current Time.
Fr+ 13
If the display shows a plus sign (+),
this indicates that the stoker motor is
currently feeding fuel.
Firing Rate Indicator
Automatic or Manual control of the room air blower.
FSM 38
DOWN button
Speed Percentage Units
UP button
The thermostat indicates manual fan
control by adding "MANFAN" to the
Round-robin Display and blinking the
STATUS light periodically.
Sometimes you may want to reduce
or eliminate the sound of the
Convection Blower. Fan Speed
Control allows you to manually set
the fan speed.
FSA
UP button
Displays the fuel feed rate in
percent. (0-99%).
Press MENU key 2 times.
DISPLAY ACTION
NOTE
How much fuel is being fed?
For the remainder of the manual, it is presumed that the ACTION starts from the Round-robin Display.
Override Temperature Setting (Temporarily)
O 70F
Press UP or DOWN button.
Display shows "O" and
current temperature setting.
ACTION
NOTE
The new temp erature setting
remains in effect until the time for the
next program m e d daytim e or
nighttime setback setting.
It can take an hour or more for the room temperature to move from one setting to another.