Instruction manual

Coal-trol Digital™ - Model TS2 V3
Automation Correct LLC
5/2010 R0
www.automationcorrect.com
Page 7
Instruction Manual
In regular operation the display
shows the current temperature, the
temperature setting and current
time. This is called the Round-robin
Display.
Round-robin Display
Quick Usage Guide
"Everything is installed and setup.
Tell me how to work the thing!"
72F
Temperature Setting
D 73F
Current Time
1126A
Current Temperature
"D" for Daytime Temperature setting.
"N' for Nighttime Temperature setting.
"O" for Override Temperature setting.
"F" for Fahrenheit
"C" for Celsius
"A" for AM
"P" for PM
I want to...
Are all combustibles a safe distance from the
appliance? Got working smoke alarm(s)? Got
working carbon monoxide detector(s)? Proper
draft? Regular appliance maintenance?
Maintain SAFE
operation of my solid-
fuel appliance:
Reduce dust when
emptying the ash-pan:
Temporarily turn the power off on the Control
Module. Empty the ash and then turn the power
back on.
Press the MENU button once. Display will show
"FSA". Press the UP or DOWN buttons to adjust
convection blower speed as desired. Setting the
speed to "0" will return the blower to automatic.
Change the temperature
setting for awhile:
Set the time of day
clock:
Turn the blower down
for awhile:
Momentarily press the MENU button two or more
times until the Round-robin Display is shown.
Stop the stove:
(I have a Coal-trol
Igniter installed.)
Return to the
Round-robin Display:
(I might be lost)
Press and hold the MENU button until the display
shows SETUP, then release. Display will show
"S1200P" or the current incorrect time. Press the
UP/DOWN buttons as needed to set the correct
time.
Press the UP button to increase or press the
DOWN button to decrease the temperature setting.
Press and hold the MENU button until the display
shows "FEED". Press the MENU button twice.
Display will show "BRNOUT". Press the UP button.
Do not turn off a power vent until display shows
"NOFIRE" and the stove temperature is cool.
Turn on your power vent, if you have one. Press
and hold the MENU button until the display shows
"FEED". Press the MENU button once. Display will
show "IGNITE". Press the UP button.
Start the stove:
(I have a Coal-trol
Igniter installed.)