Instruction manual

Coal-trol Digital™ - Model TS2 V3
Automation Correct LLC
5/2010 R0
www.automationcorrect.com
Page 15
Instruction Manual
Coal-trol Digital Specifications
Power Vent 4 A Continuous, 8A MAX
Combustion Blower 1.5A Continuous, 2A MAX
3A Continuous, 8A MAXIgniter
4 A Continuous, 8A MAXConvection Blower
1A Continuous, 2A MAXStoker
Output Power
Fuse
10A 125V Fast, (IR10kA/125V),
BK/GMA-10A or Equivalent.
120VAC 60Hz, 1200W
Input Power
All motors loads must be shaded-pole or PSC type.
Combined Output Power - 1200W MAX
Electrical:
RJ45 - 8PIN, 100 ft. Maximum
(Standard Ethernet Straight Cable)
Connection to Power Module
8VAC, 2.5VA CLASS 2Input Power
Control Module (CM2-X/PB1/CM1):
Thermostat (TS2):
Mechanical:
Construction
16 GA galvanized steel
PB1/CM1: 6 1/2"L x 9"W x 2 1/2"H
16.5 cm L x 22.9 cm W x 6.35 cm H
CM2: 6 1/4" L x 5 1/8"W x 2 1/8" K
15.7 cm L x 10.3 cm x 5.2 cm
Dimensions
Environmental:
Weight PB1/CM1: Approx. 3.5lbs/1.59Kg
Storage Temperature 40°F to 120°F
113°F/45°C MAXOperating Temperature
FOR INDOOR USE ONLY
Environmental:
Weight Less than 1 lb./0.45Kg
Storage Temperature 40°F to 120°F
97°F/35°C (Limited by software)Operating Temperature
Mechanical:
Construction ABS Plastic, UL94V-0
5.367" L x 2 5/8"W x 1.260 "H
(13.63 cm L x 6.68 cm W x 3.2 cm)
(With mounting bracket)
Dimensions
Electrical:
Note: Automation Correct LLC is constantly working to improve our products.
For this reason, all specifications are subject to change without notice.
Not all versions include all control options.
Temperature:
Accuracy ±2°F/±1.8°C @ 68°F/20°C
1°F/1°CDisplayed Precision
FOR INDOOR USE ONLY
Design Specification: UL-873
Output Power
3A 125V Fast, (IR10kA/125V),
BK/GMA-3A or Equivalent.
120VAC 60Hz, 240W
Fuse
Input Power
(Thermally Protected)
6VAC
Electrical:
Igniter Power Supply
Design Specification: UL-873
Designed for use with the Coal-trol Digital System and igniter elements only.
FOR INDOOR USE ONLY