Instruction manual

Coal-trol Digital™ – Model TS2 THERMOSTAT
Automation Correct LLC
6/2006 R0
www.automationcorrect.com
Page 9
Instruction Manual
N 1130P
Press UP/DOWN buttons to set
the time of day. Press and hold
buttons to increase or decrease
setting rapidly. When finished
press MENU button.
It can take an hour or more for
the stove to change the actual
room temperature from one
setting to another.
N 1000P
Night Temperature Setting (Nighttime Setback)
This is the time when the
Nighttime Temperature setting
will occur.
Press MENU key until display
shows Nighttime Temperature
setting. "N" on left of display)
N 71
Press UP/DOWN buttons to set
desired nighttime temperature
setting. When finished press
MENU button.
MENU button
UP/DOWN button
N 63F
New nighttime temperature
setting. When finished press
MENU button.
UP/DOWN button
In this example, at 11:30 PM
the thermostat will set the
temperature to 63°F.
H 72f
Press UP/DOWN buttons to
change temperature setting.
The new temperature setting
remains in effect until the time
for the next programmed
daytime or nighttime
temperature setting.
H 65F
Hold Temperature Setting (Hold)
From the Round-Robin display
you can temporarily change the
current temperature setting.
Press UP or DOWN button.
Display shows "H" and current
temperature setting.
UP/DOWN button
72F D 73F 1126A
72F H 73F 1126A
The Hold Temperature setting
is indicated by the "H"
indication of the current
temperature setting.
DISPLAY ACTION NOTE
DISPLAY ACTION NOTE
Round-robin Display
Use this when you want to
temporarily set the
temperature to a value different
than the Day or Night setting.