Owner's Manual

PRO TIP: Once your firmware has updated, you'll have 5 minutes left to complete Setup. If you don't
complete it in that time, the adapter will go to sleep. If you suspect that has happened, unplug the adapter
and start Setup over from the beginning. You'll have 5 minutes to complete the entire process, but it
should go quicker as your firmware has already updated.
PRO TIP: Make sure your foot is off the brake during this step. You don't want to turn the engine on, but
you do want all your dashboard lights to illuminate. If you have a push button start, some cars require one
push and some require two pushes to get to this state.