Installation manual

Owner Installation Instructions GDO-9v2 Enduro™
9
Gen 2
14
01
17 16
15
14
08
06
02
03 04 05
07
09
10
11
12
13
01
fig
PROG INPUT is used to connect the Automatic Technology Handheld Programmer ‘PG-3’ for editing control
and receiver functions, accessing diagnostic tools, and activating special features and operating modes.
JP1 CONNECTOR the shunt must be fitted for solar operation.
SBCO2 J4 STANDBY BATTERY OR SOLAR CHARGER CONNECTOR the shunt must be plugged
if battery or solar charger is not connected.
10A Fuse
15
16
17
GDO-9v2GEN2 User Manual v101.indd 9 15/11/2012 10:07:37 AM