Installation manual

28
GDO-9v2 Enduro™ Owner Installation Instructions
Gen 2
Default Settings & Specifications
Factory default settings
Default Step Maximum
Courtesy light time 3 Mins. 4 Mins.
Obstruction force margin 0.7 Amps 0.1 Amps 2.0 Amps
Auto close time 0 Secs 1 Sec. 255 Secs.
Speed Mode Medium 1 Fast
Maintenance counter 3000 Cycles - -
Technical specifications
Power supply 230V - 240V AC 50Hz
220V AC 60Hz Export Model
Transformer rating 24V DC
Standby power 2.2 Watts
Input power 200 Watts
Motor type 24V DC permanent magnet
Shuttle travel distance in the C-Rail 2.8m approx. (standard 3160 mm C-rail)
Maximum shuttle travel distance in the C-Rail 5m (with extended C-Rail)
Maximum door opening: Width x Height
Weight:
18m
2
100 kg
Minimum Clearance
(Bottom of C-Rail to highest point of door travel)
40 mm
Rated load 500N (50kg)
Nominal force 150N (15kg)
Receiver code storage capacity 64 x 4 button transmitter codes
Transmitter frequency TrioCode™ type
Coding type Multi-frequency Code hopping
Number of code combinations Over 4.29 billion random codes
Code generation Non-linear encryption algorithm
Transmitter battery CR 2032, 3 Volts
Courtesy light Bright LED
Controller fuse 10A slow blow
GDO-9v2GEN2 User Manual v101.indd 28 15/11/2012 10:07:52 AM