User's Manual

Kit contents:
Powerhead Drive Unit Kit (Fig.02).
1 X PA1000 drive unit;
1 X Handheld Transmitter with battery;
1 X Wall mount Transmitter with battery;
2 X Door attachment arms;
1 X Accessory and hardware pack.
PLUS
Single Piece Track With Pre-Assembled Chain
(Fig.03)
NOTE: Chain in one piece rail has been tensioned by the
factory. Do not adjust the tension of the chain.
IMPORTANT NOTE: If modication to the track length
required, adjustment must be made only from power head
End.
OR
Single Piece Track With Pre-Assembled
Timing Belt (Fig.04)
NOTE: Timing belt in one piece rail has been tensioned by
the factory. Do not adjust the tension of the timing belt.
IMPORTANT NOTE: If modication to the track length
required, adjustment must be made only from power head
End.
Fig.02
Fig.04
Fig.03
PA1000 Instruction Manual (Instructions d’installation)10