User's Manual

Installation
C-Rail Attachment
Step 1 - Attach C-Rail to Powerhead
Locate and insert the powerhead’s shaft into the C-Rail’s
sprocket as shown in Fig.05.
Step 2 - Secure C-Rail to Powerhead
Fix the two track brackets as shown in Fig.06. Fix with the
four screws supplied in the accessory pack.
Locate shaft into sprocket
Shaft
Screws M4 X 8
Track bracket (x2)
Fig.06
Fig. 05
Where possible, install the door opener 7
feet or more above the oor.
D Power Drive : Instruction Manual
© Copyright 2011
11PA800V1 Instruction Manual (Instructions d’installation)