User's Manual

Kit Contents
PA800 Kit contains (Fig. 03)
1 x PA800 powerhead drive unit;
1 x Transmitters set
(Set includes PTX-5 (hand held remote control) and
WTX-4 (wall mounted remote control) transmitters with
batteries);
2 x Door attachment arms;
1 x Accessory and hardware pack;
1 x Installation Manual.
Fig. 03
plus
Single Piece C-Rail with Preassembled Chain
(Belt)
NOTE: Chain in one piece rail has been tensioned by the
factory. Do not adjust the tension of the chain.
IMPORTANT NOTE: If a modication to the length of the
track is required, the adjustment must be made from the
powerhead end only.
Fig.04
PA800V1 Instruction Manual (Instructions d’installation)10