User's Manual

Fig.34

REPLACE BATTERY WITH CR2032 ONLY

How To Use Your Operator

Removing the Battery From the Transmitter

(Battery Type: 3V Lithium Battery CR2032).

Use a non-metallic object (e.g. pen) to remove the battery.

(Fig.34)

In-built Locking Facility

DO NOT lock your door when your operator is engaged as it

has in-built locking facility. With the operator engaged your

door will be locked whether the power is on or off.

Manual Door Operation

CAUTION: when operating the manual

release while the door is open. The door may

fall rapidly due to weak or broken springs, or

due to being improperly balanced.

CAUTION! Do not disengage the operator to

manual operation with children/persons or

any objects including motor vehicles within

the doorway.

To disengage the operator from the door (preferably with

the door in the closed position), pull down on the string

handle on an angle towards the door. This will allow you to

manually open or close the door. To re-engage the operator

pull the string handle away from the door.

WARNING! When the operator is manually

disengaged, the door is no longer locked.

To lock the door manually, re-engage the

operator after the door is closed.

Power Failure

When there is a power failure, the operator will be unable to

automatically open or close your garage door. To use your

door whilst there is no power you will need to disengage

the operator and use the door manually – see Manual

Operation above.

D Power Drive : Instruction Manual

23PA700V1

Instruction Manual (Instructions d’installation)