Installation manual

42
GDO-10V1 Toro
®
Owner Installation Instructions
Replacing Back Up Batteries
68
Fig
Step 19.1 Replacing Back Up Batteries
Unplug the drive unit from mains power.
Disengage motor using manual release cord.
Remove the bottom cover by pressing in from sides
and sliding downward.
Remove the two screws and slide upward the top
cover to remove it.
Remove the battery bracket by undoing the battery
bracket screws.
Remove the batteries and replace with the same
Type.
1.
2.
3.
4.
5.
6.