Installation manual

Owner Installation Instructions GDO-10V1 Toro
®
23
Editing The Store Location
This feature is only available when coding the fi rst
button of a new transmitter.
1. Press NEXT or PREV to move cursor over Store No.
(Fig. 30)
2. Press UP or DOWN to select new Store No.
3. Press SET to Confi rm or NEXT/PREV to move to
next fi eld.
This is useful when managing transmitters using
a scheme which ties the store location to the
transmitter’s owner.
Selection Of ID or Serial Number Display
1. Press NEXT to navigate to the Menu 1 ”Code
Transmitter” (Fig.31) .
2. Press SET to enter the transmitter edit procedure.
3. Press NEXT to enter transmitter list and edit mode.
4. Press NEXT/PREV to move cursor over ID fi eld.
5. Press NEXT to reveal Serial Number (Fig. 32).
The serial number display is provided for additional
means of identifi cation. The transmitter in this example
has serial number 12345.
Editing A Character Field
1. Press NEXT or PREV to move select character
to change. (Fig. 33)
2. Press UP or DOWN to scroll through and select
new character.
3. Press NEXT or PREV to move to next character.
4. Repeat step 2.
5. Press SET to record changes.
The second line of the display shows a list of available
characters with the current value indicated at the
cursor position (Fig. 34).
14 ID B B SMITH
56789 AB CDEFGHIJ
B
PRESS
14 ID B B SMITH
56789 AB CDEFGHIJ
B
PRESS
33
fi g
34
fi g
Transmitter editing (cont.)
14 ID [No Name]
OSC PED LGT VAC
PRESS
C
MENU 1
Code Transmitter
PR E S S
30
fi g
31
fi g
14 SN 12345
OSC PED LGT VAC
SN
PRESS
32
fi g