Installation manual

22
GDO-10V1 Toro
®
Owner Installation Instructions
Editing Transmitter Settings
Display Transmitter Record
Using one of the methods below, display the required
transmitters details.
Navigating To “Edit Transmitter” Menu
1. Press NEXT to navigate to the Menu 1 (Fig. 27) .
2. Press SET to enter the transmitter edit procedure.
3. Press NEXT to enter transmitter list and edit mode.
Editing Button Function Field
1. Press NEXT or PREV to move the cursor to the left or
right and between the top and bottom lines to select
the desired fi eld.
2. Press OPEN or CLOSE to change the displayed value
(Fig. 28). The available functions are shown below.
Selecting OFF will prevent the opener responding to
that button.
Available functions
OSC (Open/Stop/Close)
PED (Pedestrian access)
SWP (Swipe)
CLS (Close)
OPN (Open)
STP (Stop)
LGT (Courtesy Light)
VAC (Vacation Mode)
AUX (Auxiliary )
OFF (No action)
3. Press SET to save changes or press NEXT or PREV to
move to next fi eld. The example in (Fig. 29) shows
that PED is assigned to the transmitter button 2. The
transmitter in the example is transmitter number 14
which has the ID label AB Smith.
NOTE: If all button functions are set to OFF, when
SET is pressed, the opener will prompt to confi rm if
the transmitter is to be deleted. Press SET to delete or
STOP to continue editing.
Transmitter Editing
14 ID A B SMITH
OSC PED LGT VAC
PRESS
D
PRESS
14 ID A B SMITH
OSC PED LGT VAC
PRESS
4
29
fi g
28
fi g
MENU 1
Code Transmitter
PR E S S
27
fi g