Installation manual

ManualsBrandsAutomatic Technology ManualsGarage Door OpenerGDO-10v1Toro

Owner Installation Instructions GDO-10V1 Toro

®

15

Menu Structure

Menu 9

Diagnostics

Menu 10

Memory tools

Menu 11

Setup Travel

Menu 1

Code

transmitter

Menu 2

Current

Trips

Menu 3

Auto-close

times

Main Screen

Door status &

information

Menu 11.2

Reproﬁ le

Travel

Menu 11.3

Set pedestrian

Code/edit

transmitter

procedure.

See page 21

Parameter list

1. CLOSE margin

2. OPEN margin

3.OBST revese

time see p 19

Parameter list

1. STD auto-close

2. PE Beams auto-close

3. Ped’n auto-close

4. PE Ped’n auto-close

5.A/C After CLS Obst

6.A/C After OPN Obst

7.A/C After PWR up

See page 39

Reproﬁ le the

door travel

see page 20

Ped’n position

set up

procedure.

See page 27

Menu 10.1

CLR control?

Menu 10.2

CLR Tx’ers?

Memory reset see page 36

Menu 9.1

Test inputs

Menu 9.2

Test tx’ers

Menu 9.3

Display history

Menu 9.5

Service counter

Menu 9.6

Counters

Menu 9.4

Memory Usage

Control input

status display.

See page 35

Transmitter

testing

See page 35

Event history

display

See page 35

Periodic service

cycle counter

See page 36

Cycle and

event counter

See page 36

Memory usage

See page 35

Parameter list

1. On after

cycle time

2. On before

opn time

3. On before

cls time

See page 38

Parameter list

1. Open speed

voltage

2. Close speed

voltage

See page 30

See page 30

Parameter list

1. Open lock time

2. Close lock time

3. Pre-opn lock

time

4. Pre-cls lock

time.

See page 37

NOTES

1. Press PREV/NEXT buttons move

to Left/Right.

2. Press OPEN/CLOSE buttons to

change setting.

3. Press SET button to save changes.

4. Press STOP to return to MENU

without saving changes.

NOTE: System will automatically

return to the main screen

after 30 secs if a menu screen is

displayed and no buttons

are pressed.

Menu 5

Light times

Menu 6

Motor settings

Menu 7

Operating

Modes

Menu 4

Lock times

Menu 11.1

Setup

Limits

Travel limit set

up procedure.

See page 17

Menu 9.7

Version Info

Firmware

Version Info

Menu 8

Time Clock

Modes

Menu 8.1

Set Time/Date

Menu 8.2

View

Programes

Menu 8.3

Settings

Set time/date

See page 33

View/Edit

programes

See page 33

Settings

See page 34