Installation Instructions

5
Auto-Lock Installation Instructions
emergency operation
Press the emergency lock/unlock button on the front of the Auto-Lock to
disengage the locking bolt from the guide track and allow you to disengage
the opener and open the door.
WARNING! The emergency lock/unlock button on
this product is not to be used as a primary means of
locking the door under normal circumstances.
The emergency lock/unlock button is to be used only in case of power outage
or emergency.
battery change
a. Replace lock batteries (2 x C-LR 14) immediately when the Auto-lock LED’s
red and green lights flash 3 times or are flashing slowly.
b. Remove cover by unscrewing the four screws on the main cover.
c. Replace batteries, refit cover and secure with screws.
d. Operate opener to complete a full open / close cycle and ensure Auto-lock
engages.
Remove screws to
open main cover