Troubleshooting guide

26
GDO-7v2 SecuraLift® Owner Installation Instructions
Factory Default Settings
Default Step Maximum
Maximum motor run time 30 secs - -
Courtesy light time 4 mins 10 secs 10 mins
Obstruction force margin 3 1 27
Auto close time 0 secs 5 secs 4 mins
Technical Specifi cations
Power supply 230V - 240Va.c. 50Hz
Standby power 2.2 Watts
Motor power 250 Watts (1/3 HP)
Motor type Alternating Current
Shuttle travel distance * 2.7m approx. (Standard)
Maximum shuttle travel distance in the C-Rail * 3.750m (with extension)
Maximum door opening: Width:
Height:
Weight:
5500mm (16.5m
2
)
3000mm
100kg
Short term peak force 800N (80kg)
Lift force 600N (60kg)
Nominal force 150N (15kg)
Receiver type UHF Multi-frequency FM Receiver
Receiver code storage capacity 24 X 4 button Transmitter Codes
Transmitter frequency UHF Multi-frequency FM Transmitter
Coding type Code hopping
Number of code combinations Over 4.29 billion random codes
Code generation Non-linear encryption algorithm
Transmitter battery CR2032 (3 Volts)
Courtesy light Edison (screw mount) 240V 60W rough service (or
construction type)
Controller fuse 5A slow blow
NOTE:
1. The door must be well balanced. A person should be able to lift the door up manually with very little effort in
case of an emergency.
2. Intermittent operations may occur in areas which experience very strong winds. Strong wind puts extra pressure
on the door and tracks which may in turn trigger the safety obstruction detection system intermittently.
Default Settings & Specifi cations