Specifications

PARAMETERS
20
DOOR STATUS INDICATORS
DOOR OPENER STATE
OPEN LED
GREEN
CLOSE LED
RED
DOOR STATUS
LED YELLOW
BEEPER
OPEN ON
CLOSE
ON
OPENING
FLASHING
CLOSING
FLASHING
DOOR TRAVEL STOPPED FLASHING FLASHING
DOOR OBSTRUCTED WHEN OPENING FLASHING
DOOR OBSTRUCTED WHEN CLOSING FLASHING
BEEPS WHILE
DOOR IS MOVING
DOOR OVERLOADED
ALTERNATING
FLASHES
ALTERNATING
FLASHES
DOOR IN OPEN POSITION WITH
AUTO CLOSE MODE SELECTED
ONE SECOND
FLASHES
MAINS POWER INTERRUPTED
RAPID
FLASHES
BUTTONS FUNCTION
O/S/C Opens/Stops/Closes the door
Door Code Codes a transmitter button for O/S/C function
Light Code Codes a transmitter button for light function
Door Code + Close Codes a transmitter button for pet (pedestrian) function
Light Code + Close Codes a transmitter button for vacation function
Force Margin Set + Open Increases the obstruction force margin setting
Force Margin Set + Close Decreases the obstruction force margin setting
Force Margin Set (then) Set Reloads the factory set default obstruction force margin setting
Auto Close Time (then) Open Increases the auto close delay time
Auto Close Time (then) Close Decreases the auto close delay time
Auto Close Time (then) Set Reloads the factory set default auto close delay time
Force Margin Set + Auto Close Time (then) Open Each press of the open button increases the light time by 10 secs.
Force Margin Set + Auto Close Time (then) Close Each press of the open button decreases the light time by 10 secs.
Force Margin Set + Auto Close Time (then) Set Reloads the factory set default light time
Set (for 2 Secs.) Clears the door limits set positions. Limits then need to be reset.
Set + Close (for 2 Secs.) Enters pet (pedestrian) position mode.
Set (then power on) & hold until all LEDs are off Deletes control parameters excluding transmitter storage memory.
Door Code (then power on) & hold until all LEDs are off Deletes all transmitter storage memory.
Set + Door Code (then power on) & hold until all LEDs are off Deletes all control parameters and transmitter storage memory.