Instruction manual

30
GDO-6v3 EasyRoller
®
Owner Installation Instructions
Factory Default Settings
Default Step Maximum
Maximum motor run time 25 secs - -
Courtesy light time 3 mins 10 secs 4 mins
Obstruction force margin 13 1 20
Auto close time 0 secs 1 secs 4 mins
Technical Specifi cations
Power supply 230V - 240V A.C. 50Hz
Standby power 2.2 Watts
Motor power 100 Watts
Motor type 24VD.C. Permanent Magnet
Controller Voltage 24VD.C.
Maximum door opening: Width:
Height:
Weight:
5500mm
3000mm
100kg
Opener Limits Travel 3.0 turns of Door Drum Wheel
Receiver type TrioCode™ type
Receiver code storage capacity 14 X 4 button Transmitter Codes
Transmitter frequency TrioCode™ type
Coding type Code hopping
Number of code combinations Over 4.29 billion random codes
Code generation Non-linear encryption algorithm
Courtesy light Festoon Type - 15W 24VD.C.
Controller fuse 10A slow blow
NOTE:
1. The door must be well balanced. A person should be able to lift the door up manually with very little effort in
case of an emergency.
2. Intermittent operations may occur in areas which experience very strong winds. Strong wind puts extra pressure
on the door and tracks which may in turn trigger the safety obstruction detection system intermittently.
Default Settings & Specifi cations