Instruction manual

Owner Installation Instructions GDO-6v3 EasyRoller

Parameters

Button Functions

Buttons Function

OPERATE Opens/Stops/Closes the door

DOOR CODE Codes a transmitter button for operate, vacation

and pet functions

LIGHT CODE Codes a transmitter button for light function

FORCE MARGIN SET & OPEN Increases the obstruction force margin setting

FORCE MARGIN SET & CLOSE Decreases the obstruction force margin setting

FORCE MARGIN SET (then) SET Resets the factory default force margin settings

AUTO CLOSE TIME (then) OPEN Increases the Auto-Close delay time

AUTO CLOSE TIME (then) CLOSE Decreases the Auto-Close delay time

AUTO CLOSE TIME (then) SET Resets the factory default Auto-Close delay time

CLOSE (for 6 secs.) Clears the door limits set positions. Limits then

need to be reset

SET & CLOSE (for 2 secs.) Enters pet (pedestrian) position mode

SET (then power on) & hold until all LED’s are off Deletes control parameters excluding transmitter

storage memory

DOOR CODE (then power on) & hold until all LED’s

are off

Deletes all transmitter storage memory

SET & DOOR CODE (the power on) and hold until all

LED’s are off

Deletes all control parameters and transmitter

storage memory.

SET Re-initialises the Opener to re-calculate force

margin