Technical data

3. Installation

Wood boilers are to be installed according to the present norms and rules. The requirements of

norm PN 87/B 02411 according building of solid fuel boiler room and the norm PN-91/B-02413 ac-

cording open system boilers’ producing should be taken into account.

Eko-Vimar Orlański company prescribes using chimney inputs which preserve against the

chimney permeating. The company doesn’t take responsibility in case of faults resulting from not

using chimney inputs.

1. Chimney ue should correspond to the parameters of „DIAGRAM OF CHIMNEY CHOSING

ACCORDING TO THE DIN 4705 NORM”.

2. Boiler room should be large enough to enable boiler’s cleaning (>2,2 m).

3. The distance between the boiler and the partitions should enable right access for all of the

boiler’s parts - it shouldn’t be less than - look at “Orlan boiler’s placing”.

Orlan boiler’s placing

4. There shouldn’t be any cables nor electric installations which aren’t for boiler’s room using.

Before smoke outlet’s connecting to the chimney ue, there should be a chimney sweep’s ap-

proval.

According to the PN-EN 303-5 norm accumulation tank should be assembled together with wood

boiler - its capacity is listed in reference to the . 4.2.5. point in the norm