Pulse 2 Hub WELCOME / BIENVENUE / WILKOMMEN / BIENVENIDO
Quickstart guide Plug your Hub into a centrally located power outlet. Confirm that the Hub is blinking blue after being powered on. 2.4Ghz only Or Ethernet Pair the Hub to your network by using the Wi-Fi 2.4Ghz or connecting a network cable to the Ethernet Port on your router. Download the Pulse 2 app from the Apple Store or Google Play Store.
IOS - HomeKit ? STEP 1 Pairing Process Add new location Lets create a location. Example: My Home address. Location name Time to add some devices My Home Add a Hub then you can start adding shades. Add a Hub Back ? STEP 2 What is the Hub type? ? STEP 3 Ensure your hub device is on Next STEP 4 Ensure your hub device is on Please ensure you are connected to a 2.4GHZ WiFi network. You will need to scan the barcode on the bottom of the Hub.
Android ? STEP 1 Pairing Process Add new location Lets create a location. Example: My Home address. Location name Time to add some devices My Home Add a Hub then you can start adding shades. Add a Hub Back What is the Hub type? ? STEP 3 ? STEP 2 Next ? STEP 4 Hub connection Set your timezone Select the timezone and enable or disable daylight savings.
