Users Manual

rolleaseacmeda.com
© 2020 Rollease Acmeda Group
HOW TO PAIR A MOTOR TO THE APP:
During the setup, the hub may need to be moved room to room during the pairing process.
We recommend setting up your motors with a remote prior to syncing with the App.
v
STEP 5 Pair a motor
Choose your pairing method: ‘PAIR USING
HUB’ or ‘COPY FROM REMOTE’.
*We recommend copying from a remote for
the best results.
STEP 1 Pair a motor
On the home screen select ‘DEVICES’
then select the ‘Plus’ icon to add a
new shade.
STEP 2 Pair a motor
From the list select the HUB you wish
to pair the motor too.
STEP 3 Pair a motor
Select which device type best
represents your shade.. (NOTE this
can’t be changed later)
STEP 4 Pair a motor
Make sure the shade device is
plugged in or ready to be paired and
select ‘NEXT’.
STEP 6 Pair with Remote
Make sure the remote is tuned to the
shade’s individual channel (not Ch 0).
Remove the remote battery cover and press
the upper left P2 button Twice, then “Next”.
STEP 7 Pair with HUB
Press and hold the P1 button on the motor
head ~2 seconds. The motor will jog up and
down once and you will hear one audible
beep. Press ‘PAIR’ on the app screen.
STEP 8 Pair a motor
Wait as the app searches for the new
device.