Users Manual

rolleaseacmeda.com
© 2020 Rollease Acmeda Group
ADDING ADDITIONAL HUB TO EXSITING LOCATION:
STEP 3 - Configure a Hub
Follow on the screen
instructions and click on the
button to connect to NEW
HUB.
STEP 5 – HomeKit Success
The Hub has successfully
connected to HomeKit. Press
“Done” to continue.
STEP 6 – Time Zone
Select your Time Zone. This is
important for timers to operate
correctly. Ensure daylight savings is
enabled.
STEP 7 – Finalizing
Wait as the hub finalizes the setup.
STEP 8 – Pairing Completed
The Hub is ready to be used! Press
‘DONE’ to start the Application.
STEP 4 - Configure a Hub
From the list select the hub
you wish to pair to. Select
‘NEXT’
STEP 1 - Configure a Hub
Select the location desired to add a
new hub to.
STEP 2 - Configure a Hub
Click on “ADD NEW HUB” to
start the process to setting up
your HUB on the App.