User Guide

rolleaseacmeda.com

HomeKit Troubleshooting:

If you have failed to pair your hub to the Automate Pulse 2 app or HomeKit you may need to first remove the location in the Home app.

Here are the steps to clear the locations out of the Pulse 2 app and Apple Home.

From the Automate Pulse 2 App.

Removing locations in Apple Home App.

STEP 26

STEP 27

STEP 28

STEP 26

STEP 27

STEP 28 STEP 29

Open the Pulse2

App

Select location from the top left

Select the location and delete

the locations

Force Quit the app

Select Home App

Select “Home” icon in the top

left and scroll to the bottom.

Remove the home location.

Factory Reset hub by pressing

the reset button for 10 seconds

until the LED turns solid red.

Now Refer back to the original

Set Up Guide (Step 1)