User Guide
2
rolleaseacmeda.com
© 2020 Rollease Acmeda Group.
Voice Command Expected Shade Movement or response
Close / Open <blinds name> Shade will open / Close to top or bottom Limit
Close / Open <room name> blinds / shades Room will open / Close to top or bottom Limit (rooms are setup in the Home App)
Set <blinds names> to <percentage> Shade will move to the called percentage (100% is Open 0% is closed)
Open / Close<blinds names> to
<percentage>
Shade will move to the called percentage (100% is Open 0% is closed)
Close / Open <blinds name> <a little bit> Shade will open or close 10% of the total limit to the direction of the called limit
Close / Open <blinds names> halfway Shade will move to 50% from top or bottom limit
Open / Close Blinds All blinds in the Pulse 2 App will follow the open or close command
Open / Close Shades All blinds in the Pulse 2 App will follow the open or close command
Raise / Lower Blinds / Shades All blinds in the Pulse 2 App will follow the open or close command
Are <blinds name> open? Siri will respond yes or no your blind is open or closed
What’s is the position of the <blinds name> ? Siri will respond the percentage of the blind position is X%
What’s is the battery percentage of the
<blinds name> ?
Siri will respond ether Critical or Normal, Normal is above 50% Critical means
recharge now
GROUP CONTROL:
Another method of operating window shades through HomeKit is through rooms. These rooms need to be setup in the Home app, rooms
created in the Pulse 2 App are not transferred over to home app. Once that room has been created in the Home app, triggering it to
operate, is as simple as asking Siri to open / close that room.
PERCENTAGE CONTROL:
An individual window shade or group can be sent to any percentage of openness. The percentage will be based on the programmed
limits on the motor. A shade that is completely raised to its upper limit is at 0%, while a shade that is completely lowered to its lower limit is
at 100%. To move an individual shade only a little down, simply say “Siri close the shade a little bit”
TIPS:
Siri responds to names created in the Automate Pulse 2 App. Avoid using the word blind or shade in the Automate Pulse 2 app description
example blinds 1. This will conflict when you say open all blinds. If you have changed the name of your shade in your Pulse 2 App, please
ensure you force close the Automate Pulse 2 App, then re-open the Pulse App. Open the Apple home app to check the names migrated
to Apple Home