Instruction manual
16
© 2010 Directed Electronics. All rights reserved.
Short run/turbo mode
Short run turbo mode keeps the engine running after arriving at your
destination for a programmable period of 1, 3, 5 or 10 minutes. This
allows the system’s timer to conveniently cool down the turbo after you
have left the vehicle.
To activate:
1. Park the vehicle and set the parking brake.
2. Remove your foot from the brake pedal and leave the engine
running.
3. Press and release the
and buttons at the same time. The
lights will flash to indicate the remote start has entered short run
turbo mode.
4. Turn off the key, the engine will keep running.
5. Exit and secure the vehicle. The engine will turn off after the pro-
grammed run time.
Temperature Start Mode
Pressing the , and simultaneously activates the Tempera-
ture Start mode. The parking lights flash fast four times to confirm activa-
tion. The engine does not start once activated, it starts when the vehicle
interior temperature drops below 0°F.
Deactivate Temperature Start mode by pressing the same buttons again
or turning the vehicle ignition on. The parking lights flash slowly four
times to confirm deactivation
Valet take-over
The Valet Take-Over feature allows the vehicle to remain running after
the key has been removed from the ignition. This feature is useful for
occasions when you wish to exit and lock the vehicle for short periods
of time, but would like to leave the motor running and the climate