Installation guide

System Features Menus

* is Channel 1 and is Channel 2.

Feature Descriptions

The features of the system are described below. Features that have additional settings that can be

selected only when programming with the 998T Bitwriter

are indicated by the following

icon:

1 ACTIVE/PASSIVE LOCKING (ARMING): When active locking (arming) is selected, the starter

kill will arm (if connected) only when the transmitter is used. When set to passive locking (arming),

the starter kill will arm (if connected) 30 seconds after the ignition key is turned off.

2 CHIRPS ON/OFF: This feature controls the chirps that confirm locking (arming) and unlocking

(disarming) of the system. A siren or horn must be connected to the H1/10 BROWN wire.

3 IGNITION CONTROLLED DOOR LOCK ON/OFF: When turned on, the doors will lock three

seconds after the ignition is turned on.

4 IGNITION CONTROLLED DOOR UNLOCK ON/OFF: When turned on, the doors will

unlock when the ignition is turned off.

Feature Default LED ON Setting LED OFF Setting

Number (Press Channel 1*) (Press Channel 2*)

1 Active locking (arming) Passive locking (arming)

2 Chirps ON Chirps OFF

3 Ignition-controlled door lock ON Ignition-controlled door lock OFF

4 Ignition-controlled door unlock ON Ignition-controlled door unlock OFF

5 Active locking Passive locking

6 Ignition-controlled domelight ON Ignition-controlled domelight OFF

7 0.8 second door lock pulses 3.5 second door lock pulses

8 Double pulse unlock OFF Double pulse unlock ON

9 Security features ON Security features OFF

10 Code Hopping

ON Code Hopping

OFF

2003

Directed Electronics, Inc.