User guide

– 16 –
SETUP (All Models)
Sanitizing Mode
 • WiththemachineOFF,presstheONkey.
 • ImmediatelypressandholdtheOFFkey.
The display initializes until 88 displays.
Next, SET X
°F
°C
displays. X can be H, C or P:
H = Hot Water Sanitizing, Internal Booster.
C = Chemical Sanitizing, No Booster.
P = Hot Water Sanitizing, External Booster.
 • PressCYCLEtoselectP,H,orCasthesanitizingmode.
After 5 seconds, the selection is saved and the machine turns off.
End of Cycle Buzzer
 • WiththemachineOFF,presstheONkey.
 • ImmediatelypressandholdtheOFFkey.
The display initializes until 88 displays.
Next, SET X
°F
°C
displays. X can be P, H or C. (See above).
 • PressandholdtheOFFkey.
Next, SET WASH XX displays. XX can be On or OF:
SET WASH On = End of Cycle Buzzer is ON.
SET WASH OF = End of Cycle Buzzer is OFF.
 • PressCYCLEtoselectOnorOFfortheEndofCycleBuzzer.
After 5 seconds, the selection is saved and the machine turns off.
SHORTCUT IF
PROGRAMMING BOTH FEATURES
AT THE SAME TIME.
SET WASH OF
SET WASH On
SET C
°F
°C
SET P
°F
°C
SET H
°F
°C
AM15 Dishwasher Technical Manual Page 26 of 83