Instruction manual

6
© 2012 Directed. All rights reserved.
Using your System
Commands and Confirmations
Commands, Basic or Advanced, are used to activate system features
and are performed by pressing one of the Command buttons. Basic
commands control the most often used security and remote start fea-
tures while Advanced commands control more specialized features
and request reports.
Confirmations for Basic or Advanced commands are indicated
first by siren chirps and parking light flashes, and then by illuminated
LED’s and beeps or tones on the remote control. A description of each
feature confirmation is found in the following Basic command and
Advanced command sections.
Performing Commands
Perform Basic commands by pressing a Command button.
Perform Advanced Commands by pressing the
button before
pressing a command button.
Advanced command example: Silent Arm
1. Press the
button once, the transmit LED turns on.
2. Press the
button while the transmit LED is still on to perform
the Silent Arm command.
3. The Arm LED on the 2-way remote control flashes to confirm
when the Silent Arm message from the system is received.