Instruction manual

9
© 2012 Directed. All rights reserved.
times. The Arm LED, 1 beep and 2 fault tones play to confirm.
Sensors will not be activated for any level of impact.
s Sensor Bypass off: The Parking lights flash 1 time. The Arm LED
and 1 beep play to confirm. Sensors are fully operational.
Note
System needs to be armed to perform Sensor Bypass.
Perform arm command any time to turn Sensor Bypass Off.
Runtime Reset
Press and release , then press and release
If more time is needed while remote start is active, runtime reset will
reset the runtime counter to the pre-programmed setting. The Remote
start On tones play to confirm runtime reset.
Note
Remote Start must be On to use this feature.
* See Remote and System Operations section for detail
** See Alarm Features in online guide.