Instruction manual

SM425 INSTRUCTION MANUAL 3.0 INSTALLATION
Figure 3-9 Wall Mounting
<Panel Mounting>
1. Cut out the panel according to Figure 3-10.
Figure 3-10 Panel cutout sizes
2. Remove the fitting from the converter by loosening the four screws.
3. Insert the converter case into the cutout hole of the panel.
4. Re-attach the mounting fitting removed in step (2) to the converter.
5. Firmly fix the converter to the panel. Fully tighten the two clamp screws to hold the panel with the
fitting.
52 42500001 REV A