Instruction manual

SM425 INSTRUCTION MANUAL 2.0 SPECIFICATIONS
34 42500001 REV A
2.7.4 Stop Valve (Part No. L9852CB or G7016XH)
This valve mounted on the calibration gas line in the system allows for one-touch calibration. This is
applies to the system configuration shown for system 1 in section 0.
Standard Specifications
Connection: RC 1/4 or 1/4 FNPT
Material: SUS 316 (JIS)
Weight: Approx. 80 g
Table 2-10 Stop valve part numbers
Figure 2-13 Stop valve
2.7.5 Check Valve (Part No. K9292DN or 96751016)
This valve is mounted on the calibration gas line (directly connected to the detector). This is applied to a
system based on the (System 2 and 3) system configuration. This valve prevents the process gas from
entering the calibration gas line.
Standard Specifications
Connection: Rc1/4 or 1/4FNPT
Material: SUS304 (JIS)
Pressure: 70 kPa G or more and 350 kPa G or less
Weight: Approx. 40 g
Table 2-11 Check valve part numbers