Instruction manual

2.0 SPECIFICATIONS SM425 INSTRUCTION MANUAL
2.7 Other Equipment
2.7.1 Dust Filter for the Detector (Part No.: 96751017)
This filter is used to protect the detector sensor in a high particulate application.
This filter requires a measurement gas flow of 1m/sec or faster for circulation of the gas.
Standard specification
Applicable detector: Standard-type detector for general-use (the measurement gas flow should be
approximately perpendicular to the probe.)
Mesh: 30 microns
Material: Sic (Filter), SUS316 (JIS)
Weight: Approx. 0.2 kg
Table 2-8 Filter part numbers
Figure 2-10 Dust filter dimensions
42500001 REV A 29