Instruction manual

1.0 OVERVIEW SM425 INSTRUCTION MANUAL
Figure 1-3 System 3
*1 Shield cable; Use shielded signal cables, and connect the shield to the FG terminal of the converter.
*2 Select the desired probe from the Probe Configuration table in 1.2.2.
*3 When a zirconia oxygen analyzer is used, 100% N
2
gas cannot be used as the zero gas. Use
approximately 1% of O
2
gas (N
2
-based).
1.2 SM425 System Components
1.2.1 System Components
42500001 REV A 3