Instruction manual

SM425 INSTRUCTION MANUAL 10.0 OTHER FUNCTIONS
Figure 10-6 “Display Item” Display
10.1.5 Language Selection
You can select English, German, or French for the display. If you selected an English display (basic code:
-E, for the display) at the time of purchase, “English” will be the default language.
To select the language you want, follow these steps:
1. Select the Setup key from the basic panel display screen to display the Execution/Setup display
screen. Then select Maintenance from the Execution/Setup display screen.
2. Select the Display setup from the Maintenance display screen.
3. Select Language from the Display setup display screen. The language selection display screen
as shown in Figure 10-7 appears.
Figure 10-7 Display Setup Display Screen
10.2 Blow Back
10.2.1 Blow Back Setup
The following sections describe the blow back setup procedures required for carrying out blow back.
10.2.1.1 Mode
There are three blow back modes available:
1. No function – blow back disabled.
2. Semi-automatic – in this mode, touch panel operations or contact input signals will start and
perform blow back operations according to a preset time and output stabilization time.
3. Automatic – performs blow back operations automatically according to a preset interval.
160 42500001 REV A