Instruction manual

8.0 DETAILED DATA SETTING SM425 INSTRUCTION MANUAL
8.6.3.2 Procedure
Follow these steps to make a fuel setting:
1. Press the Setup key in the Basic Panel display screen.
2. Select Setup in the Execution/Setup display screen. The “Commissioning” (Setup) display screen
then appears.
3. Select “Others” and then the Fuel setup as shown in Figure 8-19.
4. Select “Theoretical air quantity” and “Content of moisture in the exhaust gas” in turn. The
numeric-data entry display screen then appears. Enter numeric data using the numeric keys.
5. Select “more” in the Fuel setup display screen. The Fuel setup screen shown in Figure 8-20
appears.
6. Enter the numeric data for “Value of the X coefficient” and “Absolute humidity of the atmosphere”.
7. Select “finished” to return to the display screen shown in Figure 8-9.
8.6.3.3 Default Fuel Settings
The default values for fuel values are shown in Table 8-10.
Table 8-10 Default Settings for Fuel Values
Figure 8-19 Fuel Setup
Figure 8-20 Fuel Setup
42500001 REV A 139