Operation Manual

of GPS position will be located at the middle of the screen. Note: this option does not apply to map rotation in 3D
mode, i.e. map auto-rotation may be disabled only in 2D display mode.
• hardware screen rotation - activates screen rotation triggered by the sensor.
Show on the map in addition – in this section, you can select additional horizontal street labels in 3D, display of GPS
position and altitude, the compass indicating the direction of travel and the direction to the next route point (displays an
additional arrow on the map screen, indicating the direction to the next route point), as well as the route progress bar.
Preferences part 2
In this window, you can enable/disable:
• built-up area icon,
• speed limit sign,
• chainage,
• additional vertical arrows,
• lane assistant,
• direction indicator to the next route point,
• route progress bar,
• menu animations.
Scale
The two first screens enable the users to adjust the scale used
automatically with the following modes: city scale in 2D mode,
city scale in 3D mode, intermediary scale 2D, intermediary scale
3D, overview scale 2D, overview scale 3D.
On the last screen you can enable/disable automatic zooming
in/out of the map upon turning or POI warnings: the application
will change the scale at the turn or in the proximity of the POI,
to ensure their improved visibility on the screen. AutoMapa also
offers the adjustment of the scale for map zooming in/out.
3.3.2 Route - Settings
In this dialog box you can specify additional parameters for the program route calculation function.
Car details
In this box you can include the speed profile when calculating
the route and set the average speeds for particular road grades,
and the related estimated fuel consumption.
The above data influence the estimated time of arrival (ETA),
including the values displayed in the route info ("Route|Info"
menu), and the traffic speed during route demonstration
("Route|Demo" menu).
The "All" road type is the obligatory maximum speed limit for all
road categories.