Operation Manual

3.3 Settings menu
In the settings menu (select "Settings" from the main menu)
you can change many useful parameters of software to fit your
preferences and requirements of your device.
3.3.1 Interface - Settings
With interface settings you can change the appearance of the
screen in accordance with your preferences.
Map
In this box you can change the way the map is displayed on the
device screen.
Show road outlines – you can configure drawing the outlines
of road sections on the map, speeding up the program
operation.
Small / large label fonts on the map - specifies the size of
fonts displayed on the map.
Hide local roads at the distance - specifies the scale for
hiding lower grade roads.
Show widened roads - enables/disables the widened road
sections on the map
View
With these options you can adjust the colours of the map to
reflect your preferences, and change the manner of its display in
3D mode.
Map colours in day mode – specifies the map colour set,
selected separately for day mode.
Map colours in night mode – specifies the map colour set,
selected separately for night mode.
Horizon (in 3D view) - specifies the method for displaying the
horizon in 3D mode.
Inclination (in 3D view) - specifies the method for displaying
the map slope, depending on the scale ("Auto") or at a set
value.
Preferences
In this screen you can enable/disable the following options used
during navigation:
Automatically run - Enables/disables automatic running of the
following options:
• switching to 3D mode – the map will be automatically
switched to the 3D mode
• switching to night mode - if this option is activated,
the program will automatically (based on the GPS
reading, including the position, time of day and year)
switch to night mode, i.e. it will change the colours of
the map and of other components of the screen to a
setting more suited to night-time navigation, which
does not tire the eyesight and does not dazzle during
the drive, when the car interior is dark.
• turning the map in the driving direction – in
showing position and navigation mode, the map is
rotated in the direction of user rotation. If disabled, the map will always be oriented to the north, and the cursor