Operation Manual

Recalculate
Recalculates the determined route; function available only after specifying the route points and refusal to calculate it. In
navigation mode, it is replaced with option "Calculate from the current position".
3.1.2 Blocked sections and areas
The list of all blocked sections is displayed: blocked sections are displayed first, and they are marked with a red circle
(traffic ban), while unblocked sections - with a grey circle. In the list of blocked areas (accessible by tapping on the
"Areas" button), blocked areas are marked with a red circle (traffic ban), and unblocked areas - with a grey circle. This
option enables the user to: view the blocked section or area on the map, unblock the section or area, modify its beginning
and/or expiry date, remove all blocked sections or areas.
Blocked sections or areas can be saved to a file, loaded, added from a file or imported from previous system versions.
3.2 GPS menu
GPS menu groups functions required for GPS device operation in the program.
3.2.1 GPS tracks
A GPS track is information stored on the PC, obtained from the
GPS antenna, which can be saved to the program when the GPS
receiver is enabled. The track is saved to two files with user-
defined names and the following extensions: .gps and gps.bin.
Show track
Shows the saved track as a green line on the map. The map is
scaled to fit the complete track on the screen. The display can
also show several tracks simultaneously.
Hide track(s)
Hide track(s) displayed on the map.
Track playback
Shows the GPS position based on a previously saved track. The
operation is similar to driving with the GPS receiver enabled,
also the navigation feature is available.
During track playback, the top of the screen shows keys that
speed down, stop or speed up track playback. The number to
the right of the keys shows the playback speed as a multiple of
the driving speed.
Enable track storage
After you provide the file name and location, the information
from the GPS receiver will be saved. This is symbolized by a red
square in the bottom left corner of the screen .
Save route as a track
Converts the route calculated on the map and saves it as a GPS track. The resulting file may be used as a standard GPS
track from live recording.
Using the "Convert track" button, the user can convert the route to the KML format, so that the GPS track can be viewed
with Google Earth.