Operation Manual

Route type
Option for selecting one of six route types (not all available in simplified mode). The available route types are described in
Chapter 2/Navigation/Route mapping.
Fast
Calculates a fast route. If route points have been set, it recalculates the current route in accordance with the fast route
algorithm, and if no points have been set, it changes the type of route to be calculated. For more information on routes,
see section "Route calculation".
Best
Calculates the best route, i.e. the average between the fast route (where throughput is the priority) and the short one.
You can change the relation between the two types in the settings.
Short
Calculates a short route.
Off-road
Calculates an off-road route.
Walking
Calculates a walking route.
Easy
Calculates an easy route.
Cross-country
Calculates a cross-country route.
3.1.1 Modify
This item offers the following options:
Load
Loads route points saved in an atm file. The file's location
should be selected on the device.
Save
Saves route points to an atm file. The file can be saved in any
location on the device.
Original
Calculates the original route.
Alternative
Other from START, END and VIA points, this option attempts
to use alternative roads throughout the entire course of this
route.
Delete detours
Deletes temporary detour roadblocks created with the "Detour" function available from the Show position pop-up menu in
the navigation mode.