Operation Manual

3 Advanced features and system settings
This section describes advanced system features omitted above, as well as all the available settings selectable in various
application screens.
3.1 Route menu
Route menu includes many options useful for calculating and
handling the program routes. The menu is divided into two
screens, selectable by pressing arrow buttons. To exit to the
main window, tap X. Most menu options are only available for
route calculation.
In simplified mode, the "Route" menu is composed only of
key route-related options. The section below describes the
full version of the menu screen.
Demo
Select Demo to show a demonstration of the calculated route.
The operation is identical to the playback of the stored GPS
track. After reaching the destination, the demonstration
starts once again.
Show all
The application scales the map to fit the complete route on the screen.
Reverse
Reverses the order of route points to create a return route that connects the same points, but in the order reverse to the
previously calculated one.
Info
Multi-screen dialog box featuring information related to the
calculated route:
Route points window includes a POI reordering option (using
arrow buttons by the name of route point) and a simple
optimization of THROUGH points that consists in finding
the THROUGH point closest (as the crow flies) to the START
point. Then the second closest point is found, etc., until all
the THROUGH points have been reordered. Another function
available in this window is the "Swap" the route points and the
"Return the original" - it reverts to the original route settings if
the user selects this option prior to accepting the changes.
NOTE: In the description of each route point, two distances
from the Start point are given. The first denotes the distance
considering the calculated route, the second - as the crow flies.
The General route info window informs about the length of the
calculated route and the ETA. This window also displays
information about the Start and End points time zones.
The Lengths and times window shows the division of the route into road types, length and driving time.
The Manoeuvres window - a list of route manoeuvres. Possibility of counting them from the START point or from the
previous manoeuvre. By clicking the manoeuvre directly, the user may display it on the map or block it.
The Unwanted manoeuvres window - if the route goes via blocked sections, the program will take account of them in
this window. Clicking the manoeuvre directly allows to show it on the map or unlock it.
The Route parameters window allows to change the basic route parameters.
Delete
Deletes the route points set on the map.