Operation Manual

Inside each map (for a large number of Polish cities), there are
embedded data on REAL speed limits for each road section. The
system compares the current vehicle speed with the speed limit
valid for the section the vehicle is on at the moment, and when
the limit is exceeded, the warning sign is displayed with the
information on the maximum allowed speed. The current speed
is highlighted with the red colour of the "Speed" section. Click
the sign to turn off displaying the speed exceeding warning.
The following icon will be displayed when driving through a
built-up area: .
Tapping the individual panel sections enables sequential
switching between the following values: current time (GPS),
remaining time to destination, estimated time of arrival, current
speed, distance to destination, the following manoeuvre (after
the upcoming manoeuvre). After clicking the distance to the
next manoeuvre, its symbol or name of the street for that
manoeuvre, first the route fragment is shown from a distance,
and then the whole route. The third tap returns to the position display.
If you need to leave the route calculated by AutoMapa, just keep on driving and do not worry: the program will
automatically map an alternative route in view of the situation on the road.
The route auto-correction function supports automatic
navigation when the GPS receiver signals that the user is off the
route. There can be many reasons for going off the route: traffic
jam, road works, accident, driver's error, map error, inaccurate
GPS reading, etc. In practice, this happens quite often. Thanks
to auto-correction, the driver does not have to make
independent attempts to return to the mapped route or
manually set a new route from the present position – this will be
done by AutoMapa. When the driver goes off the mapped route,
AutoMapa will wait for a few seconds (to make sure that it is not
a planned manoeuvre, e.g. an attempt to bypass a road
obstruction) and will automatically map a new route in line with
the previously set points, beginning from the user's current
position.
Traffic Lane Assistant
The Traffic Lane Assistant helps the driver to cross complex road
junctions. AutoMapa indicates which lanes should be chosen to
smoothly drive through European junctions. The Assistant
activates automatically whenever the map offers the required
lane data. It is not possible to manually turn it on or off.
The Traffic Lane Assistance system was first introduced for
European countries. The Traffic Lane Assistant for Poland
was introduced in 6.6.0 version.