Operation Manual

2.3 Main menu and map buttons
2.3.1 Map buttons
The screen shows 4 buttons at the bottom of the displayed map, of which two main buttons are:
in the bottom left corner of the screen, which opens the main menu.
in the bottom right corner of the screen, which opens the context menu of the selected point on the map and is
equivalent to tapping and holding the pen on the screen.
Moreover, the map features also the following buttons:
Telephone support option (for select devices only).
/
Sound enable/disable. Hold the button to display the volume slider instead of the scale slide rule.
/
This switch shows the distance to the nearest route point/destination. It is displayed only after adding THROUGH
points.
/
Sequential switch between the following modes: 2D and 3D. Hold the 3D button to display the slider controlling
the 3D buildings blocks height instead of the scale slider.
/
On-screen button switch – Enables/disables semi-transparent on-screen buttons. Hold it to switch the map
move/zoom mode.
/ /
Fast change of scale in the navigation mode. Available option: town (zoom-in), outside town (zoom-out),
overview (region).
Enabling of disabled navigation mode, e.g. by map scrolling or GPS shut-down.
Information on the current position (in accordance with the GPS localization), or description of the point selected
on the map.
Opens the AM'Traffic system statistics window. No data to send.
Opens the AM'Traffic system statistics window. Communicating with the server - sending or receiving data.
Opens the AM'Traffic system statistics window. The system is active, data are collected for the next transfer
session.
Opens the AM'Traffic system statistics window. The previous attempt to receive or send data failed.